Best Performance of Reactor Controllers Using Stochastic Optimization Method
الكلمات المفتاحية:
Mathematical Mödling of continuous stirred tank reactor، MATLAB Simulation، PID controller, Generic Model Control، Fuzzy Logic Control، Simulated Annealing (SA)الملخص
Based on the mass and energy balances for the reactor and heating system, a mathematical model for a continuous stirred tank reactor is created. The concentration is changed stepwise, and the reactor's temperature is gauged as a result. This study compares the use of PI, generic model control, and fuzzy logic controllers on the system with the aim of evaluating each one's performance in light of the integral of the absolute error that is produced. The controller's settings are adjusted using a simulated annealing technique. However, in order to have a fairly comparison The range of the PI and Generic model controller’s gains are increased as well as the simulated annealing solution numbers, on the other hand the number of membership functions for variable and solution numbers are increase for fuzzy controller. MATLAB/SIMULINK has been used to implement the control and simulation investigation.
المراجع
Suja Malar & Thyagarajan, "Modelling of Continuous Stirred Tank Reactor Using Artificial Intelligence Techniques", Department of Electrical and Electronics Engineering, PET Engineering College of India, Vol.3, pp. 145-155, (2009).
WG da Silva; PP Acarnley; JW Finch; ‘Tuning of brushless dc drive speed controller with an on-line genetic algorithm’, European Power Electronics Conference, Lausanne, 1999.
P. L. Lee, G. R. Sullivian. Generic model control (GMC). Computers and Chemical Engineering, 1988, 12(6): 573-580.
B. J. Cott, S. Macchietto. Temperature control of exothermic batch reactors using generic model control. Industrial Engineering Chemical Research, 1989, 28(8): 1177-1184.
CP. Coleman, D. Godbole: ‘A comparison of robustness: fuzzy logic, PID, and sliding mode control’, Proceedings of the Third IEEE Conference on Fuzzy Systems, V. 3, P. 1654 -1659, 1994
WG da Silva, PP Acarnley, and JW Finch; ‘A comparison of fuzzy and conventional speed control in electric drives’, European Power Electronics Conference, Lausanne, 1999.
N. Gulley, and J. S. Roger Jang, ‘Fuzzy logic toolbox for use with MATLAB’, The Math Workers Inc., 1995-1999.
Haj-Ali, H. Ying; ‘Structural analysis of fuzzy controllers with nonlinear input
Prof. Song Prof. Irving;” Optimisation techniques for electrical power systems’’ part 2 Heuristic optimisation methods; Power Engineering Journal, P.151-160, June 2001.
X. Yao;’A new simulated annealing algorithm’, Int. J. Computer Math. V. 56, P.161-168, 1995.
Z. Xiaoyum, H. Yun, D. John; ‘Genetic algorithms and simulated annealing for robustness analysis’, Proceedings of the American Control Conference, V. 6, P. 3756-3760, 1997.
