Efficiency of Applying Inhibitor to Control Internal Corrosion in Gas Pipeline Systems

Authors

  • Ali K. M. Al-Zenati Mechanical Engineering Department, Faculty of Engineering, Sirte University
  • Amhamed A. Omar Sirte Oil Company
  • Nagi A. Issa Faculty of Engineering, Benghazi University
  • Nasar A. Ali Mechanical Engineering Department, Faculty of Engineering, Sirte University
  • Mansour M. Salih Mechanical Engineering Department, Faculty of Engineering, Sirte University

Keywords:

Efficiency, Corrosion, Inhibitor, Film, Protection and Gas pipeline systems

Abstract

Utilization of film-former corrosion inhibitors is one of the most reliable and economical ways of controlling internal corrosion of oil and gas pipeline systems. The current study sheds light on the feasibility range of the success of the application of corrosion inhibitor "amines base filming inhibitor" in the gas pipeline 34" BMK "Brega-Misurata-Khoms" by utilizing various ways such as monitoring techniques, test and analysis methods, injection rate of inhibitor and efficiency of corrosion inhabitation. Internal corrosion is monitored by different techniques such as electrical resistance (E/R) probe using cosasco corrocometer model CK-3, direct specimens of dry gas and intelligent pig surveys. The samples of the last two methods of monitoring are achieved by chemical analysis in laboratory of Sirte Oil Company. This chemical analysis is accomplished to determine the content of compounds in the gas, for instance iron/iron oxide, sulphur, carbon dioxide and hydrogen sulphide, etc. In reality, the internal corrosion rate of the inner surface of the pipeline system is negligible in comparison with standard criteria of corrosion. Furthermore, assessment of the film-forming corrosion inhibitor was found roughly sufficient to provide an excellent internal corrosion inhabitation because of the environmentally friendly properties of the gas, as a dry and sweet gas.

References

.Abd El-Aziz S. Fouda, Samir A. Abd El-Maksoud, Elsherbiny H. El-Sayed, Hazem A. Elbazbc and Ashraf S. Abousalem. Experimental and surface morphological studies of corrosion inhibition on carbon steel in HCl solution using some new hydrazide derivatives.RSC Adv., 2021, 11, 13497.

. Chandrabhan Verma, Eno E. Ebenso, M. A. Quraishi and Chaudhery Mustansar Hussain. Recent developments in sustainable corrosion inhibitors: design, performance and industrial scale applications. Mater. Adv., 2021, 2, 3806.

. Florina Branzoi, Adriana Băran and Simona Petrescu. Evaluation of Corrosion Protection Performance of New Polymer Composite Coatings on Carbon Steel in Acid Medium by Electrodeposition Methods. Coatings 2021, 11, 903.

. Gas transmission & supply department in Sirte Oil Company.

. Corrosion protection department in Sirte Oil Company.

. Chemical processing and laboratory in Sirte Oil Company.

. Mc Murry J. Organic chemistry: with biological applications (2nd ed.). Belmont, CA: Brooks/Cole. 2011. pp. 395. ISBN 9780495391470

. Hostettmann K, Marston A, Hostettmann M. Preparative Chromatography Techniques Applications in Natural Product Isolation (Second ed.). Berlin, Heidelberg: Springer Berlin Heidelberg. 1998. p. 50. ISBN 9783662036310.

. How It Works: Pipeline Pigging. www.products.slb.com. Schlumberger. Retrieved 10 April 2020.

. Pipeline Inspection Gauge (PIG). Engineered power.com. Retrieved 10 April 2020.

. Abdel-Hafez, Mamoun; Chowdhury, Sheruzzaman (2015). Pipeline Inspection Gauge Position Estimation Using Inertial Measurement Unit, Odometer, and a Set of Reference Stations. ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering. 2 (2). doi:10.1115/1.4030945.

. Jones D. A., Principles and prevention of corrosion, Second Edition, Prentice Hall.

. Mars, G., Fontana, Corrosion Engineering, third Edition, MeGraw-Hill International editions, Materials Science and Engineering Series 1986.

. A. J. Kidnay, W. R. Parrish, D. G. McCartney, Fundamentals of Natural Gas Processing, Second Edition, CRC Press Taylor & Francis Group, Boca Raton, FL, USA, 2011, 552 p.

. NACE MR0175/ISO15156, Petroleum and natural gas industries – Materials for use in H2S-conatining environments in oil and gas production, NACE International, Houston, TX, 2015, 164 p.

. D. E. Milliams and R.N. Tuttle. ISO 15156/NACE MR0175 – A new international standard for metallic materials for use in oil and gas production in sour environments. Paper no. 03090, NACE CORROSION 2003 Conference, NACE International, Houston, TX, USA, 2003, 10 p.

. NORSOK M-001, Materials Selection, 5th Edition, 2014, 32 p.

. S. Nešić, Key issues related to modelling of internal corrosion of oil and gas pipelines – A review, Corrosion Science, 2007, Vol. 49, pp. 4308-4338.

. Alec Groysman, Corrosion for Everybody. SpringerVerlag, Dordrecht, 2010, 368 p.

. S. Nešić, G.T. Solvi, and J. Enerhaug, Comparison of the Rotating Cylinder and Pipe Flow Tests for Flow-Sensitive Carbon Dioxide Corrosion, Corrosion, 1995, 51(10): 773-787.

. S. Guo, F. Farelas, and M. Singer, Effect of monoethylene glycol on sweet top of the line corrosion. Paper no. 7891, NACE CORROSION 2016 Conference, NACE International, Houston, TX, USA, 2016, 17 p.

. F. Vitse, S. Nešić, Y. Gunaltun, D. Larrey de Torreben, and P. Duchet-Suchaux, Mechanistic Model for the Prediction of Top-of-the-Line Corrosion Risk, Corrosion, 2003, 59(12):1075-1084.

. Agency for Toxic Substances and Disease Registry (ATSDR), Toxicological profile for mercury. Atlanta, GA: U.S. Department of Health and Human Services, Public Health Service, 1994.

. J.M. Campbell, Gas Conditioning and Processing, Vol.1: The Basic Principles, 8th ed., Ed. M. John, 2004, Campbell and Company.

. B. Traconis, Y.D. Mierez, and A. Jimenez. Mercury removal systems at Santa Barbara Extraction Plant. In: Proceedings of the 75th Annual Convention Gas Processors Association, Tulsa, OK, USA, 1996, p. 123.

. N. Eckersley, Advanced mercury removal technologies. Hydrocarbon Processing, 2010, 69(1): 29-35.

. J. Stiltner, Mercury removal from natural gas and liquid streams. In: Proceeding of the 81st Annual Convention Gas Processors Association, Tulsa, OK, USA, 2002.

. Corrosion Control by pH Stabilization Stein Olsen;Anne Marie Koren Halvorsen Paper presented at the corrosion 2015, Dallas, Texas, March 2015. Paper Number: NACE-2015-5733.

. pH stabilization as a technique for corrosion control in sour wet gas-condensate pipelines, Applicability conditions, merits and limitations September 2019 Conference: Eurocorr 2019 ( Lecture Presentation in Annual Business Meeting of Working Party 13, Corrosion in oil and gas production) At: Seville-spain

. Askar Soltani, Reza Zareie, Koorosh Farzanfar A Comparison Between pH-stabilization Technique and Corrosion Inhibitor Injection Method in Corrosion Mitigation in Sour Gas Transmission Pipelines: A Field Study in South Pars Gas Complex september 2018 confrance.

Downloads

Published

2023-01-21