The Effect of the Aneurysms Diameter on the Mechanical Stress Using Fluid Structure Interaction
الكلمات المفتاحية:
Abdominal Aortic Aneurysm، Fluid Structure Interaction، Geometry Effect، Wall stressالملخص
The maximum diameter criterion currently has been widely used to predict the risk of rupture of abdominal aortic aneurysm (AAA). The effect of the aneurysm diameter on the flow pattern and stress distribution is carried out in this study by using the fully coupling fluid structure interaction analysis with hyperelastic material and Non Newtonian fluid models. The results show that the aneurysm diameter effects the direction of flow and also causing increase in the size of vortices as the diameter increased. The stress on the inner wall is higher than the outer wall, and the different between them decreased as the diameter increase. Linear correlation was observed between the aneurysm diameter and maximum stress (R2= 0.9418). These results have confirmed the aneurysm diameter as an important parameter to predict the aneurysm rupture.
المراجع
M. law, Screening for abdominal aortic aneurysms, British Medical Bulletin, 54 (1998) 903- 913.
F.A. Lederle, R.L. Kane, R. MacDonald, Timothy J. Wilt, Systematic Review: Repair of Unruptured Abdominal Aortic Aneurysm, Annals of Internal Medicine, 146 (2007) 735-741.
R. Gillum, Epidemiology of aortic aneurysm in the United States, Journal of Clinical Epidemiology, 48 (1995) 1289-1298.
D.A. Vorp, Biomechanics of Abdominal Aortic Aneurysm, Journal of Biomechanics, 40 (2007) 1887-1902.
T.M. McGloughlin, B.J. Doyle, New Approaches to Abdominal Aortic Aneurysm Rupture Risk Assessment : Engineering Insights With Clinical Gain, Journal of the American Heart Association, 30 (2010) 1687-1694.
A. Abbas, R. Attia, A. Smith, M. Waltham, Can We Predict Abdominal Aortic Aneurysm (AAA) Progression and Rupture by Non-Invasive Imaging?—A Systematic Review, International Journal of Clinical Medicine, 2 (2011) 484-499.
E. Choke, G. Cockerill, W.R.W. Wilson, S. Sayed, J. Dawson, I. Loftus, M.M. Thompson, A Review of Biological Factors Implicated in Abdominal Aortic Aneurysm Rupture, European Journal of Vascular and Endovascular Surgery, 30 (2005) 227-244.
R. Limet, N. Sakalihassan, A. Albert, Determination of the Expansion Rate and Incidence of Rupture of Abdominal Aortic Aneurysms, Journal of Vascular Surgery 14 (1991) 540-548.
J. Powell, L. Brown, J. Forbes, F. Fowkes, R. Greenhalgh, C. Ruckley, S. Thompson, Final 12- Year Follow-up of Surgery Versus Surveillance in the UK Small Aneurysm Trial, British Journal of Surgery, 94 (2007) 702-708.
F.A. Lederle, G.R. Johnson, S.E. Wilson, D.J. Ballard, W.D. Jordan, J. Blebea, F.N. Littooy,
J.A. Freischlag, D. Bandyk, J.H. Rapp, A.A. Salam, Rupture Rate of Large Abdominal Aortic Aneurysms in Patients Refusing or Unfit for Elective Repair Joutnal American Medical Association, 287 (2002) 2968-2972.
T. Hatakeyama, H. Shigematsu, T. Muto, Risk Factors for Rupture of Abdominal Aortic Aneurysm Based on Three-Dimensional Study, Journal of Vascular Surgery, 33 (2001) 453- 461.
S. Kyriacou, J. Humphrey, Influence of Size, Shape and Properties on the Mechanics of Axisymmetric Saccular Aneurysms, Journal of Biomechanics, 29 ( 1996) 1015-1022.
M. L.Raghavan, B. Ma, R.E. Harbaogh, Quantified Aneurysm Shape and Rupture Risk, Journal of Neurosurgery, 102 (2005) 355–362.
D.A. Vorp, M.L. Raghavan, M.W. Webster, Mechanical Wall Stress in Abdominal Aortic Aneurysm: Influence of Diameter and Asymmetry, Journal of Vascular Surgery, 27 (1998) 632-639.
A.J. Hall, E.F.G. Busse, D.J. McCarville, J.J. Burgess, Aortic Wall Tension as a Predictive Factor for Abdominal Aortic Aneurysm Rupture: Improving the Selection of Patients for Abdominal Aortic Aneurysm Repair, Annals of Vascular Surgery, 14 (2000) 152-157.
J.V. Geest, E.S.D. Martino, A. Bohra, M.S. Makaroun, D.A. Vorp, A Biomechanics-Based Rupture Potential Index for Abdominal Aortic Aneurysm Risk Assessment Demonstrative Application, New York Academy of Sciences, 1085 (2006) 11–21.
L. Speelman, A. Bohra, E.M.H. Bosboom, G.W.H. Schurink, F.N.v.d. Vosse, M.S. Makaroun,
D.A. Vorp, Effects of Wall Calcifications in Patient-Specific Wall Stress Analyses of Abdominal Aortic Aneurysms, Journal of Biomechanical Engineering, 129 (2007) 105-109.
D.A. Vorp, J.P.V. Geest, Biomechanical Determinants of Abdominal Aortic Aneurysm Rupture, Journal of the American Heart Association, 25 (2005) 1558-1566.
M. Fillinger, M. Raghavan, S. Marra, J. Cronenwett, F. Kennedy, In Vivo Analysis of Mechanical Wall Stress and Abdominal Aortic Aneurysm Rupture Risk, Journal of Vascular Surgery 36 (2002) 589-597.
M.L. Raghavan, M.F. Fillinger, S.P. Marra, B.P. Naegelein, F.E. Kennedy, Automated Methodology for Determination of Stress Distribution in Human Abdominal Aortic Aneurysm, Jornal of Biomechanical Engineering, 127 (2005) 868-871.
B.J. Doyle, A. Callanan, M.T. Walsh, P.A. Grace, T.M. McGloughlin, A Finite Element Analysis Rupture Index (FEARI) as an Additional Tool for Abdominal Aortic Aneurysm Rupture Prediction, Vascular Disease Prevention, 6 (2009) 114-121.
M. Fillinger, S. Marra, M. Raghavan, F. Kennedy, Prediction of Rupture Risk in Abdominal Aortic Aneurysm During Observation: Wall Stress Versus Diameter, Journal of Vascular Surgery 37 (2003) 724-732.
M.L. Raghavan, D.A. Vorp, M.P. Federle, M.S. Makaroun, M.W. Webster, Wall Stress Distribution on Three Dimensionally Reconstructed Models of Human Abdominal Aortic Aneurysm, Journal of Vascular Surgery 31 (2000) 760-769.
M. Truijers, J.A. Pol, L.J. SchultzeKool, S.M. van Sterkenburg, M.F. Fillinger, J.D. Blankensteijn, Wall Stress Analysis in Small Asymptomatic, Symptomatic and Ruptured Abdominal Aortic Aneurysms, European Journal of Vascular and Endovascular Surgery, 33 (2007) 401-407.
Z.-Y. Li, U. Sadat, J. U-King-Im, T.Y. Tang, D.J. Bowden, P.D. Hayes, J.H. Gillard, Association Between Aneurysm Shoulder Stress and Abdominal Aortic Aneurysm Expansion : A Longitudinal Follow-Up Study, Journal of The American Heart Association, 122 (2010) 1815-1822.
A.K. Venkatasubramaniam, M.J. Fagan, T. Mehta, K.J. Mylankal, B. Ray, G. Kuhan, I.C. Chetter, P.T. McCollum, A Comparative Study of Aortic Wall Stress Using Finite Element Analysis for Ruptured and Non-ruptured Abdominal Aortic Aneurysms, Eur J Vasc Endovasc Surg, 28 (2004) 168-176.
C.M. Scotti, E.A. Finol, Compliant Biomechanics of Abdominal Aortic Aneurysms: a Fluid- Structure Interaction Study, Computers & Structures, 85 (2007) 1097-1113.
K.M. Khanafer, J.L. Bull, R. Berguer, Fluid-Structure Interaction of Turbulent Pulsatile Flow within a Flexible Wall Axisymmetric Aortic Aneurysm Model, European Journal of Mechanics - B/Fluids, 28 (2009) 88-102.
K.H. Fraser, M.-X. Li, W.T. Lee, W.J. Easson, P.R. Hoskins, Fluid–Structure Interaction in Axially Symmetric Models of Abdominal Aortic Aneurysms, Part H: Journal of Engineering in Medicine, 223 (2008) 195-209.
J.H. Leung, A.R. Wright, N. Cheshire, J. Crane, S.A. Thom, A.D. Hughes, Y. Xu, Fluid Structure Interaction of Patient Specific Abdominal Aortic Aneurysms: a Comparison with Solid Stress Models
BioMedical Engineering OnLine, 5 (2006) 1-15.
J.F. Rodríguez, C. Ruiz, M. Doblaré, G.A. Holzapfel, Mechanical Stresses in Abdominal Aortic Aneurysms: Influence of Diameter, Asymmetry, and Material Anisotropy, Journal of Biomechanical Engineering, 130 (2008) 1-10.
D. Elger, D. Blackketter, R. Budwig, K.J. KH., The Influence of Shape on the Stresses in Model Abdominal Aortic Aneurysms., Journal of Biomechanical Engineering, 118 (1996) 326-332.
F. Helderman, I.J. Manoch, M. Breeuwer, U. Kose, O. Schouten, M.R.M.v. Sambeek, D. Poldermans, P.T.M. Pattynama, W. Wisselink, A.F.W.v.d. Steen, R. Krams, A Numerical Model to Predict Abdominal Aortic Aneurysm Expansion Based on Local Wall Stress and Stiffness, Medical & Biological Engineering & Computing, 46 (2008) 1121-1127.
E. Georgakarakos, C.V. Ioannou, Y. Kamarianakis, Y. Papaharilaou, T. Kostas, E. Manousaki, A.N. Katsamouris, The Role of Geometric Parameters in the Prediction of Abdominal Aortic Aneurysm Wall Stress, European Journal of Vascular and Endovascular Surgery, 39 (2010) 42-48.
C.B. Washington, J. Shum, S.C. Muluk, E.A. Finol, The Association of Wall Mechanics and Morphology: A Case Study of Abdominal Aortic Aneurysm Growth, Journal of Biomechanical Engineering, 133 (2011) 1-6.
S. I.Bernad, E. S.Bernad, T. Barbat, R. Susan-Resiga, V. Albulescu, Effects of Asymmetry in Patient-Specific Wall Shear Stess Analyses of Abdominal Aortic Aneurysm, Journal of Chinese Clinical Medicine, 4 (2009) 1-14.
C.M. Scotti, A.D. Shkolnik, S.C. Muluk, E.A. Finol, Fluid-Structure Interaction in Abdominal Aortic Aneurysms: Effects of Asymmetry and Wall Thickness, BioMedical Engineering OnLine, 4 (2005) 1-22.
Z. Li, C. Kleinstreuer, A Comparison Between Different Asymmetric Abdominal Aortic Aneurysm Morphologies Employing Computational Fluid-Structure Interaction Analysis, European Journal of Mechanics - B/Fluids, 26 (2007) 615-631.
E.A. Finol, K. Keyhani, C.H. Amon, The Effect of Asymmetry in Abdominal Aortic Aneurysms Under Physiologically Realistic Pulsatile Flow Conditions, Journal of Biomechanical Engineering 125 (2003) 207-217.
C.M. Scotti, J. Jimenez, S.C. Muluk, E.A. Finol, Wall Stress and Flow Dynamics in Abdominal Aortic Aneurysms: Finite Element Analysis vs. Fluid–Structure Interaction, Computer Methods in Biomechanics and Biomedical Engineering, 11 (2008) 301-322.
H. Kohno, K.-J.u. Bathe, A Flow-Condition-Based Interpolation Finite Element Procedure for Triangular Grids, International Journal for Numerical Methods in Fluids, 51 (2006) 673-699.
Z. Li, C. Kleinstreuer, Analysis of Biomechanical Factors Affecting Stent-Graft Migration in an Abdominal Aortic Aneurysm Model, Journal of Biomechanics, 39 (2006) 2264-2273.
E.A. Finol, C.H. Amon, Flow-Induced Wall Shear Stress in Abdominal Aortic Aneurysms: Part II – Pulsatile Flow Hemodynamics, Computer Methods in Biomechanics and Biomedical Engineering, 5 (2001) 319–328.
T.W. Taylor, T. Yamaguchi, Three-Dimensional Simulation of Blood Flow in an Abdominal Aortic Aneurysm—Steady and Unsteady Flow Cases, Journal of Biomechanical Engineering, 116 (1994) 88-97.
R. Adolph, D. Vorp, D.S. DL, M. Webster, M. Kameneva, S. Watkins, Cellular Content and Permeability of Intraluminal Thrombus in Abdominal Aortic Aneurysm, Journal of Vascular Surgery, 25 (1997) 916-926.
C. Taylor, T. Hughes, C. Zarins, Finite Element Modeling of Three-Dimensional Pulsatile Flow in the Abdominal Aorta: Relevance to Atherosclerosis, Annals of Biomedical Engineering, 26 (1998) 975-987.
M. Bonert, R.L. Leask, J. Butany, C.R. Ethier, J.G. Myers, K.W. Johnston, M. Ojha, The Relationship Between Wall Shear Stress Distributions and Intimal Thickening in the Human Abdominal Aorta, BioMedical Engineering OnLine, 2 (2003) 1-14.
A. Borghia, N.B. Wooda, R.H. Mohiaddinb, X.Y. Xua, Fluid–Solid Interaction Simulation of Flow and Stress Pattern in ThoracoAbdominal Aneurysms: A Patient-Specific Study, Journal of Fluids and Structures, 24 (2008) 270-280.
Y. Papaharilaou, J.A. Ekaterinaris, E. Manousaki, A.N. Katsamouris, A Decoupled Fluid Structure Approach for Estimating Wall Stress in Abdominal Aortic Aneurysms, Journal of Biomechanics, 40 (2007) 367-377.
M.S. Sacks, D.A. Vorp, M.L. Raghavan, M.P. Federle, M.W. Webster, In Vivo Three- Dimensional Surface Geometry of Abdominal Aortic Aneurysms, Annals of Biomedical Engineering,, 27 (1999) 469-479.
G. Giannoglou, G. Giannakoulas, J. Soulis, Y. Chatzizisis, T. Perdikides, N. Melas, G. Parcharidis, G. Louridas, Predicting the Risk of Rupture of Abdominal Aortic Aneurysms by Utilizing Various Geometrical Parameters: Revisiting the Diameter Criterion, Angiology, 57 (2006) 487-494.
B.J. Doyle, A. Callanan, P.E. Burke, P.A. Grace, M.T. Walsh, D.A. Vorp, T.M. McGloughlin, Vessel Asymmetry as an Additional Diagnostic Tool in the Assessment of Abdominal Aortic Aneurysms, Journal of Vascular Surgery, 49 (2009) 446-454.
Y. S.C.M, Steady and Pulsatile Flow Studies in Abdominal Aortic Aneurysm Models Using Particle Image Velocimetry, International Journal of Heat and Fluid Flow, 21 (2000) 74-83.
A. M. Muftah "3D Fluid in an Elbow Meter-CFD Model" SUSJ Journal, Sirte University,
Vol. 4, Issue 1, June 2014
A. Muftah "CFD Modeling of Elbow and Orifice Meters" SUSJ Journal, Sirte University, Vol. 7, Issue 1, June 2017, pp 15-32
