The evaluation of Aluminum Alloy Corrosion in Gabraun and Desalination Waters
الكلمات المفتاحية:
Aluminum alloy، Gabraun water، Desalination water، weight loss method، corrosion rate، Pourbaix diagram، LSIالملخص
The aim of this study was to investigate the effect of Gabraun and Desalination waters on corrosion of aluminum alloy. The corrosion tests were carried out at room temperature. The test solutions (electrolyte) used were Gabraun and Desalination water samples. Weight loss method was used. From the results obtained, it was found that the weights of all the specimens after the tests were decreased. Also it was found that that the average corrosion rate of Aluminum immersed in Gabraun water is little bit greater than the average corrosion rate of Aluminum immersed in Desalination water. The results showed that the color of the specimens surfaces immersed in Gabraun water was changed to white- gray color and the color of the specimens surfaces immersed in Desalination water was change to black-gray color. During the corrosion tests period, the Gabraun and Desalination water in the beakers was decreased about 50mL/week. The presence of some alloying elements like iron (Fe), copper (Cu) and Zinc (Zn) are susceptible to the corrosion processes. The Pourbaix diagrams showed Gabraun water and Desalination water are a corrosive mediums. The Langelier Saturation Index (LSI) showed that the Gabraun and Desalination water samples are not corrosive medium
المراجع
The libya observer, The Gaberoun lake. 2020.
N. L. Sukiman, X.Z., N. Birbilis, A.E. Hughes, J. M. C. Mol, S. J. Garcia, X. Zhou and G. E. Thompson, Chapter 2. Durability and Corrosion of Aluminium and Its Alloys: Overview, Property Space, Techniques and Developments. 2012, IntechOpen Limited: London, UK.
Uhlig, -.H.H., Corrosion and corrosion control. Second Edition ed. 1971, USA: John Wilely&Sons, Inc.
Rajput, -.R.K., A textbook of Material Science and Engineering. Third Edition ed.
, Delhi: S. K. Kataria&Sons.
Federation, A., UK Aluminium Industry Fact Sheet 2:Aluminium and Corrosion, Pdf4Pro.
Berry, W.E., Corrosion by water and steam. Chapter 7, in NACE Basic Corrosion Course. 1969, NACE: USA.
Chardonlaboratories, The Basics of Aluminum Corrosion. (viewed on 12/4/2020), Chardon laboratories: Ohio, USA.
X. L. Zhang, Z.H.J., Zh. P. Yao, Y. Song, Zh. D. Wu, Effects of scan rate on the potentiodynamic polarization curve obtained to determine the Tafel slopes and corrosion current density, in Corrosion science. 2009, Corrosion science. p. 581- 587.
A. Aballe, M.B., F. J. Botana, M. Marcos, R. M. Osuna, Electrochemical noise applied to the study of the inhibition effect of CeCl3 on the corrosion behaviour of Al-Mg alloy AA5083 in seawater, in Electrochimica Acta. 2002, Electrochimica Acta. p. 1415-1422.
Agung Setyo Darmawan, W.A.S., Pramuko Ilmu Purboputro, Agus Dwi Anggono, Masyrukan and Abdul Hamid, Effect of Increasing Salinity to Corrosion Resistance of 5052 Aluminum Alloy in Artificial Seawater, in Material Science Forum. 2019, Trans Tech Publications Ltd. p. 107-111.
Al-Rushud, A.H.A.-M.a.H.H., The Red Sea as a Corrosive Environment: Corrosion Rates and Corrosion Mechanism of Aluminum Alloys 7075, 2024, and 6061, in International Journal of Corrosion. 2018, Hindawi. p. 1-15.
Deepa, P., Padmalatha and Rao, Corrosion behaviour of 6063 aluminum alloy in acidic and in alkaline media, in Arabian Journal of Chemistry. 2017. p. 2234-2244.
D, S.M.H., Corrosion of Aluminum in soft drinks, in ZLebensm Unters Forsch.
p. 308-312.
Nemcova, A.n.N., E[va]; Pacal, B[ohumil] and Tulka, J[aromir]. Corrosion resistance of Aluminum Alloy in the of Aqueous solution of Urea. in 22nd International DAAAM Symposium. 2011. Vienna, Austria, EU: DAAAM International.
Nişancioĝlu, K., Corrosion and Protection of Aluminum Alloys in Seawater, in European Federation of Corrosion (EFC). 2007, Norwegian University of Science and Technology. p. 145-155.
Sanni, A.P.a.O.F., Oil as Corrosion Inhibitor for Aluminium Alloy in Aggressive Ennironment, in Materials Science and Engineering 391. 2018: Pretoria, South Africa.
Mohammad Asadikiya, Y.Z.a.M.G., Corrosion Study of Aluminum Alloy 3303 in Water-Ethylene Glycol Mixture: Effect of Inhibitors and Thermal Shocking, in International Journal of Corrosion. 2019. p. 1-6.
Paulina Arellanes-Lozada, O.O.-X., Diego Guzmán-Lucero, Natalya V. Likhanova, Marco A. Domínguez-Aguilar, Irina V. Lijanova and Elsa Arce-Estrada, The Inhibition of Aluminum Corrosion in Sulfuric Acid by Poly(1vinyl-3-alkyl- imidazolium Hexafluorophosphate), in Materials. 2014. p. 5711-5734.
Tao, M.J., Surface composition and corrosion behavior of an Al-Cu alloy, in Chimie physique des surface. 2016, Université Pierre et Marie Curie: Paris, France. p. 175.
Greene, N.D., Chapter 3, Corrosion-Related Chemistry and Electrochemistry, in NACE Basic Corrosion Course. 1970, National Association of Corrosion Engineers: Houston, Texas, USA. p. 19.
Doctors, C., Langelier Saturation Index (LSI). 2020 Kingston Technical Software. 22. Gustafsson, S., Corrosion properties of aluminium alloys and surface treated
alloys in tap water, in Research and Development Centre. 2011, Uppsala Universitet, Sweden: Uppsala. p. 42.
L, B.W.L.a.F., Corrosion Testing, Chapter 15, in Nace Basic Corrosion Course.
, NACE: Houston, Texas, USA. p. 35.
Joseph.R.Davis, Corrosion of Aluminums and Aluminum Alloys, Chapter 1. 1999, ASM International.
