Simulation of Groundwater Contamination Flow and Transport
Keywords:
Contamination, Dispersion, Plume, Capture Zone, Extraction WellAbstract
The purpose of this study is to predict the migration pathways and concentrations of contaminants in groundwater. By constructing a model to investigate computational flow and transport of contaminants within groundwater that represents the situation at a Canadian Forces Base Borden landfill in Ontario that was used as a refuse/ waste dump from 1940 to 1973 and then as a sanitary landfill. The model will be constructed using the site- specific geology and hydrogeology data collected as part of the site characterization. The Groundwater Vistas program will be used to construct the model to produce flow and transport of the contamination source which is placed in this model. The use of three – dimensional grid and a steady- state flow condition which can be justified and thus adequately forecast plume development. The model will be extensively used to determine the area of influence from a contamination source, optimize the design, and predict the performance when using a pumping system as a remediation. In order to delineate the capture of the plume of contaminated water in this model, it is necessary to have one or more pumping wells, which pump the contaminated water from ground to surface for treatment. The pumping wells are located down hydraulic gradient of the contamination source area at various depths and locations with different pumping rates. Each well will have what is known as a capture zone, which is an area contributing flow to that particular well. Computation of capture zones to determine the optimum number of extraction wells, their locations and rate at which they should be pumped will be undertaken.
References
Randall, J. H, David, A.S and Dawn, M.C. (2005). Numerical Simulation of Ground-Water Flow in La Crosse County, Wisconsin, and into Nearby Pools of the Mississippi River. Available at: http://pubs.water.usgs.gov/wri034154. [Access on 15th March 2008].
Martin, C. A. (2004). Modelling a controlled-sourced, multichemical plume undergoing natural attenuation. University of Waterloo, Ontario, Canada.
Kumar, C. P. (2008). National Institute of Hydrology. available at: http://www.angelfire.com/nh/cpkumar/publication/flowmodels.pdf. [Access on 7th July 2008].
Wagner, K and Rogoshewski, P. J. (1986). Remedial Action Technology for Waste Disposal Sites.
Kathleen Wagner: William Andrew Inc.
Richard, J. M (2002).Groundwater Modeling Guidance. Available at: http://www.megwrm.aun.edu.eg/sub/workshop4/gwguidance_mandle.pdf. [Access on 10th July 2008].
Rumbaugh, J. O and Rumbaugh, D. B. (2001). Environmental Simulations, Inc. Available at: http://www.groundwatermodels.com. [Access on 5th March 2008].
Stewart, R. (2008). Our ocean Planet Oceanography in the 21th century. Availableat:http://oceanworld.tamu.edu/resources/oceanography-book/groundwatercontamination.html. [Accessed on 20th November 2007].
Fetter, C. A. (1993). Contaminant Hydrogeology. The United States of America: Macmillan Publishing Company.
Groundwater Vistas.com. (2004). Available at: http://www.groundwater-vistas.com/. [Access on 15th Feb 2008].
Moyers, J. R, Nichols, D. J and Ian Whitlock, I. (2008). Disadvantages of Pump and Treat Remediation. Available at: http://www.cee.vt.edu/ewr/environmental/teach/gwprimer/Pumptrt/Pumptrt.html [Access on 5th March 2008].
Rowe, R. K, Quigley, R. M, Brachman, R. W. I. & Booker, J. R. (2004). BARRIER SYSTEMS FOR WASTE DISPOSAL FACILITIES. London: Spon Press.
