Evaluation of A Thermal-Responsible Preformed Particle Gel for Conformance Control
الكلمات المفتاحية:
Induction machine، diagnostics، current spectrum، harmonicsالملخص
Preformed Particle Gels (PPG) have been injected into mature oil reservoirs as a conformance control agent to decrease reservoir heterogeneity and thus improve sweep efficiencies during water injection for reduced water production and enhanced oil recovery. The ultimate purpose of this research paper is to evaluate the transport of a thermal responsible of two kind of preformed particle gels developed in the laboratory. A series of laboratory tests was conducted to evaluate the swelling and deswelling capacities of PPG’s at various temperatures and brine concentration. The results confirmed that PPG swelling capacity increases with temperature but decreases with salinity.
It included a series of filtration tests on swollen gel particles. PPG solutions of 0.4% wt. can easily pass through a ceramic disk with permeability of rang greater than 500 millidarcy. This research study used a sand pack model and sandstone cores to evaluate the effect of flow rate and injection pressure on PPG resistance factor and residual resistance factor. Contrary to common understanding, experiential results have shown that the particle gel flow resistance factor decrease as flow rate increases. The injecting pressure and gel flow residual resistance factor increase continuously with the increasing in the amount of injected PPG.
The new PPG products is a fluid –diverting agent designed to improve the conformance control process in deep water zones of the reservoirs and to overcome some problem that could be faced when using the regular gelation systems.
المراجع
Al-Assi A. A. et al.: “Formation and Propagation of Gel Aggregates Using Partially
Hydrolyzed Polyacrylamide and Aluminum Citrate,” SPE Journal 2009 14 (3): 450-461.[2] Bai, B., “Factors Influencing Plugging Efficiency of Gel on Porous Media,” Oil & Gas Recovery Technology, 3(3), 1997.
Bai B. et al. (2000) Selective Water Shutoff Technology Study and Application of W/O Emulsions, Paper SPE 59320 presented at SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma, 3-5 April 2000.
Bai, B., et al.: “Preformed Particle Gel for Conformance Control: Factors Affecting its Properties and Applications”, paper SPE 89389 presented at the 2004 SPE/DOE14th Symposium on IOR held in Tulsa, OK, U.S.A., April 17–21.
Bai B. et al. (2000) Selective Water Shutoff Technology Study and Application of W/O Emulsions, Paper SPE 59320 presented at SPE/DOE Improved Oil Recovery Symposium, Tulsa, Oklahoma, 3-5 April 2000.
Bai, B., et al.: “Preformed Particle Gel for Conformance Control: Transport Mechanism through Porous Media” SPERE, April 2007, 176-183.
Bai, B., et al.: “Case Study on Preformed Particle Gel for In-depth Fluid Diversion,” paper SPE 113997 presented at the 2008 SPE/DOE Symposium on IOR held in Tulsa, OK, U.S.A., April 19–23.
Bailey et al.: “Water Control,” Oilfield Review 12 (Spring 2000) 30-51. Borling et al.: “Pushing Out the Oil with Conformance Control,” Oilfield Review 6 (April 1994) 44-58.
Seright, R.S.: “Placement of Gels to Modify Injection Profiles,” paper SPE 17332 presented at SPE Enhanced Oil Recovery Symposium, 16-21 April, 1988, Tulsa, Oklahoma.
Seright, R.S.: “Gel Placement in Fractures Systems,” paper SPE 27740 presented at SPE Enhanced Oil Recovery Symposium, 17-20 April, 1994, Tulsa, Oklahoma.
Seright, R.S., et al.: “A Comparison of Different Types of Blocking Agents,” SPE 30120 presented at the European Formation Damage Conference, May, 1995.
Seright, R.S.: “Use of Preformed Gels for Conformance Control in Fractured Systems,” paper SPE 35351, SPE Production & Facilities, Feb, 1997.
Seright, R.S.: “Gel Propagation through Fractures,” SPE Production & Facilities, Nov 2001, 225-232.
Smith J. E.: “The Transition pressure: A quick method for Quantifying Polyacrylamide Gel strength,” paper SPE 18739 presented at SPE International Symposium on Oilfield Chemistry, Houston, Texas, 8-10 February 1989.
Sydansk, R.D.: “A New Conformance-Improvement-Treatment Chromium(III) Gel Technology” Presented at SPE/DOE EOR Symposium, April 17-20, 1988, Tulsa, Oklahoma.
Sydansk, R.D. et al.: “More than 12 Years’ Experience with a Successful Conformance-Control Polymer-Gel Technology,” SPE Production & Facilities, Vol.15 (4), 270-278, 2000.
Sydansk, R.D. et al.: “Polymer Gels Formulated With a Combination of High- and Low-Molecular- Weight Polymers Provide Improved Performance for Water-Shutoff Treatments of Fractured Production Wells,” SPE Production & Facilities, Vol.19 (4), 229-236, 2004.
Sydansk, R.D. et al.: “Characterization of Partially Formed Polymer Gels for Application to Fractured Production Wells for Water-Shutoff Purposes,” SPE Production & Facilities, Vol. 20 (3), 240-249, Aug, 2005.
Sydansk, R.D. et al.: “When and Where Relative Permeability Modification Water- Shutoff Treatments Can Be Successfully Applied,” SPE Production & Facilities, Vol.22 (2), 236-247, 2007.
Woods, P. et al.: “In Situ Polymerization Controls CO2/Water Channeling at Lick Creek,” paper SPE 14958 presented at the 1986 SPE/DOE Symposium on Enhanced Oil Recovery, Tulsa, April 20-23.
Zaitoun, A., et al.: “Using Microgels to Shutoff Water in Gas Storage Wells,” paper SPE 106042 presented at SPE Int. Symp. On Oilfield Chemistry, Houston, TX, USA, March, 2007.
Zeron L., et al.: “Characterization of Crosslinked Gel Kinetics and Gel Strength by Use of NMR,” paper SPE 86548, SPE Reservoir Evaluation and Engineering, June, 2008.
