Analysis of Pressure Data from The Horizontal Wells with Multiple Hydraulic Fractures in Shale Gas

Authors

  • Essa Tabar Petroleum Department, Faculty of Engineering, Sirte University, Libya
  • Kkashayar Aminian Petroleum and Natural gas Engineering, West Virginia University, USA

Keywords:

Induction machine, diagnostics, current spectrum, harmonics

Abstract

In the last several years, the unconventional gas reservoirs development has grown tremendously. Most of these unconventional reservoirs have very low permeability and are not able to produce an economic flow rate without stimulation treatments. The common method to improve the production is by a horizontal well with multiple hydraulic fractures. Hydraulic fracturing is a stimulation practice to improve the permeability in order to obtain commercial production. Horizontal wells with multiple hydraulic fracture treatments have proven to be an effective method for development of unconventional reservoirs.

The objective of this paper is to investigate the interpretation of pressure transient responses from horizontal wells with single and multiple hydraulic fractures using the commercial reservoir simulator. In addition, the paper will focus on identifying the impact of the reservoir and fracture properties on the flow regimes of a horizontal well producing from the low permeability reservoirs. The different flow regimes appear during horizontal-well transient flow. However, the existence of these flow regimes is closely associated with the dimensions of the half length of the fracture, fracture permeability, drainage area, horizontal well length, etc. Hence, it is common that some flow regimes are not present.

References

Daniel Arthur, J., Brian Bohm, Bobbi Jo Coughlin, and Mark Layne, ALL Consulting. “Evaluating the Environmental Implications of Hydraulic Fracturing in Shale Gas Reservoirs”. SPE 121038, paper presented at the 2009 SPE Americas E&P Environmental & Safety Conference, San Antonio, Texas, USA, 23-25 March 2009.

Ground Water Protection Council, Oklahoma City and ALL Consulting, Tulsa, (April, 2009). “Modern Shale Gas Development in the United States: A Primer”, Prepared for U.S. Department of Energy Office of Fossil Energy and National Energy Technology Laboratory.http://www.netl.doe.gov/technologies/oilgas/publications/epreports/shale_g as_primer_2009.pdf, Download March 25, 201.

Larsen, Leif, Statoil A/S, and Hegre, T.M., Petec A/S. “Pressure-Transient Analysis of Multifractured Horizontal Wells.” SPE 28389, paper presented at the SPE 69th Annual Technical Conference and Exhibition, New Orleans, LA, USA, 25-28 Sep. 1994.

Lee, J. and Wattenbarger, R. A., “Gas Reservoir Engineering”, TX: SPE Textbook Series vol. 5, (1996).

Brown, M., and Ozkan, E., Colorado School of Mines; Raghavan, R., Phillips Petroleum Co. (Retd.); and Kazemi, H., Colorado School of Mines. “Practical Solutions for Pressure Transient Responses of Fractured Horizontal Wells in Unconventional Reservoirs”. SPE 125053, paper presented at the 2009 SPE Annual Technical Conference and Exhibition, New Orleans, Louisiana,, USA, 4-7 Octaober2009.

Ozkan, E., Al-Kobaisi, M., Kazemi, H., Ramirez, B. Colorado School of Mines(PETSOC 2006-162). “Pressure Transient Analysis of Fractured Horizontal Wells withTransverse, Finite Conductivity Fractures. Paper presented at the petroleum Society’s 7th Canadian International Petroleum Conference, Calgary, Alberta, Canada, June 13-15, 2006.

Eclipse Reservoir Engineering Software Manual. 2010 Schlumberger.

Downloads

Published

2023-02-26