The Effect of Alumina (Al2O3) Volume Fraction and Stir casting Conditions on Porosity and Fatigue Life of Aluminum Matrix Composites

M. P. Groover, Fundamentals of modern manufacturing materials, processes, and systems. New York u.a.: Wiley, 2007.

S. A. Sajjadi, H. R. Ezatpour, and M. T. Parizi, “Comparison of microstructure and mechanical properties of A356 aluminum alloy/ Al2O3 composites fabricated by stir and compo-casting processes,” Materials & Design, 03-Aug-2011.

M. K. Akbari, H. R. Baharvandi, and K. Shirvanimoghaddam, “Tensile and fracture behavior of nano/micro tib2 particle reinforced casting A356 aluminum alloy composites,” Materials & Design (1980-2015), 24-Oct-2014.

H. Abdizadeh, M. Ashuri, P. T. Moghadam, A. Nouribahadory, and H. R. Baharvandi, “Improvement in physical and mechanical properties of aluminum/zircon composites fabricated by powder metallurgy method,” Materials & Design, 01-Apr-2011.

R. C. McCuiston, J. C. LaSalvia, and B. Moser, “Effect of carbon additions and B4C particle size on the microstructure and properties of B4C - tib2 composites,” Mechanical Properties and Performance of Engineering Ceramics and Composites III, pp. 257–268, 2007.

M. A. D. E. V. A. NAGARAL, M. M. R, V. Auradi, and B. V, “Mechanical characterization and fractography of 100 micron sized silicon carbide particles reinforced Al6061 alloy composites,” Metallurgical and Materials Engineering, vol. 28, no. 1, pp. 17–32, 2021.

V. Mohanavel, M. Naveen Kumar, K. Mageshkumar, C. Jayasekar, N. Dineshbabu, and S. Udishkumar, “Mechanical behavior of in situ ZRB 2 /AA2014 composite produced by the exothermic salt-metal reaction technique,” Materials Today: Proceedings, vol. 4, no. 2, pp. 3215–3221, 2017.

S. A. Sajjadi, H. R. Ezatpour, and H. Beygi, “Microstructure and mechanical properties of al– Al2O3 micro and nano composites fabricated by stir casting,” Materials Science and Engineering: A, vol. 528, no. 29-30, pp. 8765–8771, 2011.

Mohanavel, K. Rajan, and M. Ravichandran, “Synthesis, characterization and properties of stir cast AA6351-aluminium nitride (aln) composites,” Journal of Materials Research, vol. 31, no. 24, pp. 3824–3831, 2016.

H. K. D. H. Bhadeshia, “Steels for bearings,” Progress in Materials Science, vol. 57, no. 2, pp. 268–435, 2012.

Fatigue & Fracture of Engineering Materials & Structures, vol. 41, no. 1, 2018.

B. Flaig, K.-H. Lang, D. Löhe, and E. Macherauch, “Thermal-mechanical fatigue of the cast aluminium alloy GK-alsi10mg WA,” Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling, pp. 361–370, 1996.

M. Wolf, G. Wagner, and D. Eifler, “Fatigue and fracture behavior of MMC in the HCF- and VHCF-regime,” Materials Science Forum, vol. 783-786, pp. 1597–1602, 2014.

D. LUKASAK and D. KOSS, “Microstructural influences on fatigue crack initiation in a model particulate-reinforced aluminium alloy MMC,” International Journal of Fatigue, vol. 16, no. 3, pp. 230–230, 1994.

N. Chawla, C. Andres, L. C. Davis, J. W. Jones, and J. E. Allison, “The interactive role of inclusions and SIC reinforcement on the high-cycle fatigue resistance of particle reinforced metal matrix composites,” Metallurgical and Materials Transactions A, vol. 31, no. 13, pp. 951–957, 2000.

H. M. Mahendra, G. S. Prakash, K. S. Keerthi Prasad, and S. Rajanna, “Fatigue and facture behaviour of AL6061- Al2O3 Metal Matrix Composite: Effect of Heat Treatment,” IOP Conference Series: Materials Science and Engineering, vol. 925, no. 1, p. 012042, 2020.

S. A. Razzak, “The effect of volume fraction on the fatigue strength of unsaturated polyester / glass fiber composite,” Iraqi Journal of Physics, vol. 11, no. 22, pp. 14–19, 2019.

H. K. Yoon, “Influence of fiber orientation and volume fraction on tensile strength and fatigue life of Carall hybrid composite,” Key Engineering Materials, vol. 353-358, pp. 1455–1458, 2007.

H. Sehitoglu, “The effect of particle size on thermo-mechanical fatigue of Al/Sic Metal Matrix Composites,” Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling, pp. 371–380, 1996.

R. G. Chen, D. Zhang, R. J. Wu., and H. Sekine.. “The Effect of SiC Particle and Whisker on theStrength of Aluminium Alloy Matrix Composites”. Acta Metallurgica Sinica. 10: 22-34, 1997.

S. Murali, T. S. Arvind, K. S. Raman, and K. S. Murthy, “Fatigue properties of sand cast, stircast and extruded al–7si–0.3mg alloy with trace additions of be and Mn,” Materials Transactions, JIM, vol. 38, no. 1, pp. 28–36, 1997.

S. Skolianos, “Mechanical behavior of cast SICP-reinforced al-4.5%cu-1.5%mg alloy,” Materials Science and Engineering: A, vol. 210, no. 1-2, pp. 76–82, 1996.

A. F. WHITEHOUSE, “Creep of Metal Matrix Composites,” Comprehensive Composite Materials, pp. 371–418, 2000.

J. Cao, “The Journal of Materials Processing Technology 2018,” Journal of Materials Processing Technology, vol. 254, 2018.

Alcoa 6063,” Alloy Digest, vol. 54, no. 4, 2005.

S. A. Sajjadi, H. R. Ezatpour, and M. Torabi Parizi, “Comparison of microstructure and mechanical properties of A356 aluminum alloy/ Al2O3 composites fabricated by stir and Compo-casting processes,” Materials & Design, vol. 34, pp. 106–111, 2012.

S. A. Sajjadi, H. R. Ezatpour, and H. Beygi, “Microstructure and mechanical properties of al–Al2O3 micro and nano composites fabricated by stir casting,” Materials Science and Engineering: A, vol. 528, no. 29-30, pp. 8765–8771, 2011.

A. Sakthivel, R. Palaninathan, R. Velmurugan, and P. Raghothama Rao, “Production and mechanical properties of SICP particle-reinforced 2618 aluminum alloy composites,” Journal of Materials Science, vol. 43, no. 22, pp. 7047–7056, 2008.

K. Ravi Kumar, K. Kiran, and V. S. Sreebalaji, “Micro structural characteristics and mechanical behaviour of aluminium matrix composites reinforced with titanium carbide,” Journal of Alloys and Compounds, vol. 723, pp. 795–801, 2017.

R. Tu, N. Li, Q. Li, S. Zhang, L. Zhang, and T. Goto, “Effect of microstructure on mechanical, electrical and thermal properties of B4C-hfb2 composites prepared by Arc Melting,” Journal of the European Ceramic Society, vol. 36, no. 16, pp. 3929–3937, 2016.

R. Harichandran and N. Selvakumar, “Effect of Nano/Micro B4C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process,” Archives of Civil and Mechanical Engineering, vol. 16, no. 1, pp. 147–158, 2016.

K. Shirvanimoghaddam, H. Khayyam, H. Abdizadeh, M. Karbalaei Akbari, A. H. Pakseresht, F. Abdi, A. Abbasi, and M. Naebe, “Effect of B4C, TIB2 and Zrsio4 ceramic particles on mechanical properties of aluminium matrix composites: Experimental investigation and predictive modelling,” Ceramics International, vol. 42, no. 5, pp. 6206–6220, 2016.

R. S. Rana, R. Purohit, V. K. Soni, and S. Das, “Characterization of mechanical properties and microstructure of aluminium alloy-sic composites,” Materials Today: Proceedings, vol. 2, no. 4-5, pp. 1149–1156, 2015.

R. Harichandran and N. Selvakumar, “Effect of Nano/Micro B4C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process,” Archives of Civil and Mechanical Engineering, vol. 16, no. 1, pp. 147–158, 2016.

A. Fadavi Boostani, S. Tahamtan, Z. Y. Jiang, D. Wei, S. Yazdani, R. Azari Khosroshahi, R. Taherzadeh Mousavian, J. Xu, X. Zhang, and D. Gong, “Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated sic nanoparticles,” Composites Part A: Applied Science and Manufacturing, vol. 68, pp. 155–163, 2015.

N. Chawla, J. W. Jones, C. Andres, and J. E. Allison, “Effect of sic volume fraction and particle size on the fatigue resistance of a 2080 al/Sic P Composite,” Metallurgical and Materials Transactions A, vol. 29, no. 11, pp. 2843–2854, 1998.

Y. Ochi, K. Masaki, T. Matsumura, and M. Wadasako, “Fatigue property and fatigue crack propagation behavior of Al2O3/a6061 mmcs at room and elevated temperature,” Key Engineering Materials, vol. 261-263, pp. 1073–1078, 2004.

M. H. Jaber, G. A. Aziz, A. J. Mohammed, and H. J. AL-AIKawi, “Electrical conductivity, magnetic and fatigue properties of aluminum matrix composites reinforced with nano-titanium dioxide (tio2),” Nanocomposites, vol. 6, no. 2, pp. 47–55, 2020.

H. J. Alalkawi, A. A. Hamdany, and A. A. Alasadi, “Influence of nanoreinforced particles (Al2O3) on fatigue life and strength of aluminium based metal matrix composite,” Al-Khwarizmi Engineering Journal, vol. 13, no. 3, pp. 91–99, 2017.

K. M. Mussert , W. P. Vellinga, A. Bakker S. Van, D. Zwaag, "A nano-indentation study on the mechanical behaviour of the matrix material in an AA6061 - AL2O3 MMC",J. Mater. Sci., 37, Issue 4, pp.78-794, 2002

A. Jung, H. J. Maier, and H.-J. Christ, “Effect of SIC-reinforcement on thermo-mechanical fatigue of a dispersion-strengthened high-temperature aluminum alloy,” Thermo-mechanical Fatigue Behavior of Materials: Third Volume.

L. Y. Zhang, Y. H. Jiang, Z. Ma, S. F. Shan, Y. Z. Jia, C. Z. Fan, and W. K. Wang, “Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy,” Journal of Materials Processing Technology, vol. 207, no. 1-3, pp. 107–111, 2008.

H. Puga, S. Costa, J. Barbosa, S. Ribeiro, and M. Prokic, “Influence of ultrasonic melt treatment on microstructure and mechanical properties of ALSI9CU3 alloy,” Journal of Materials Processing Technology, vol. 211, no. 11, pp. 1729–1735, 2011.

S. A. Sajjadi, H. R. Ezatpour, and H. Beygi, “Microstructure and mechanical properties of al–al2o3 micro and nano composites fabricated by stir casting,” Materials Science and Engineering: A, vol. 528, no. 29-30, pp. 8765–8771, 2011.